Engine Cooling - TDV6 3.0L Diesel/TDV6 3.0L Diesel - Gen 1.5/TDV6 3.0L Diesel - Gen 2: Specifications
WARNING: This page is about a different variant/trim than selected.
Fluid
NOTE:
Coolant must be collected into a clean container and can be reused if not contaminated.
| Description | Specification |
|---|---|
| Land Rover premium cooling system fluid | Havoline XLC |
| Coolant concentration | 50% |
| Vehicles with block heater coolant concentration | 60% |
CAPACITY SPECIFICATION
| Item | Litres |
|---|---|
| Vehicles equipped with 2 zone Air Conditioning (A/C) | 9.4 |
| Vehicles equipped with 2 zone A/C and Fuel Fired Booster Heater (FFBH) | 9.6 |
| Vehicles equipped with 4 zone A/C | 11.2 |
| Vehicles equipped with 4 zone A/C and FFBH | 11.4 |
| Hybrid Electric Vehicle (HEV) battery circuit | 1.5 |
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Coolant expansion tank bolt | 2.8 | - | 25 |
| Coolant outlet assembly bolts | 10 | 7 | - |
| Coolant pump bolts | 10 | 7 | - |
| Coolant pump pulley bolts | 25 | 18 | - |
| Thermostat housing bracket to fan shroud bolt | 5 | - | 44 |
| Thermostat housing bolts | 5 | - | 44 |
| Radiator drain plug | 3.5 | - | 31 |
| A/C pipes to condenser nuts | 8 | - | 71 |
| A/C pipe to fan shroud bolt | 7 | - | 62 |
| Charge air cooler pipe connector to fan shroud bolt | 8 | - | 71 |
| Charge air cooler hose clamp to fan shroud bolt | 7 | - | 62 |
| Engine cooling module bolts | 15 | 11 | - |
| Cooling fan shroud bolts | 7 | - | 62 |
| Transmission fluid cooler to fan shroud bolt | 7 | - | 62 |
| Coolant bleed screw(s) | 3 | - | 27 |