Control Diagram
WARNING: This page is about a different variant/trim than selected.
A = Hardwired; AL = Pulse Width Modulation (PWM); AM = High Speed (HS) Controller Area Network (CAN) chassis systems bus; AX = FlexRay bus; AY = High Speed (HS) Controller Area Network (CAN) Power Mode Zero bus; O = Local Interconnect Network LIN) bus.
| Item | Description |
|---|---|
| 1 | Powertrain Control Module (PCM) |
| 2 | Instrument Cluster (IC) |
| 3 | Body Control Module/Gateway Module (BCM/GWM) Assembly |
| 4 | Terrain Response (TR) switchpack |
| 5 | Anti-lock Brake System (ABS) control module |
| 6 | HVAC Control Module |
| 7 | Variable coolant pump |
| 8 | Electric cooling fan - main |
| 9 | Charge air coolant pump |
| 10 | Electric cooling fan - auxiliary |
| 11 | Active grille air shutter motor - If equipped |
| 12 | Ground |
| 13 | Power supply |
| 14 | Cylinder head temperature sensor |
| 15 | Fuel temperature sensor |
| 16 | Engine Coolant Temperature (ECT) sensor |
| 17 | Ambient Air Temperature (AAT) sensor |
| 18 | Coolant level sensor |