Electric Park Brake Release When The Vehicle Has No Electrical Power (G2172813): Check
CAUTION:
LH illustration shown, RH is similar.
NOTE:
- To be carried out in the event that the vehicle has no electrical power.
- Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Remove the rear wheel and tire.
Refer to: WHEELS AND TIRES .
-
NOTE: Remove and discard the retaining bolts and O-ring seal.
Torque : 11 Nm
- Repeat the above procedure for the other side.