Toe Link (G1772292): Installation

CAUTION:
- Make sure the components are installed to the position marked in the installation.
- Nuts and bolts must be tightened with vehicle at normal ride height.
NOTE: Use a suitable transmission jack to support the components when tightening.

Install and tighten the nut and bolt.

General Equipment: Transmission jack

Torque

Stage 1: 40 Nm

Stage 2: 60°
CAUTION: Nuts and bolts must be tightened with vehicle at normal ride height.
- Install a new bolt.
  Renew Part: Toe link to knuckle bolt(s) Quantity: 1 .
- Install and tighten a the nut and bolt.
  Torque
  
  Stage 1: 70 Nm
  
  Stage 2: 240°
Remove the transmission jack.
Install the wheel and tire.
Refer to: SPECIFICATIONS
NOTE: Using Jaguar Land Rover approved equipment, check and if necessary adjust the wheel alignment. SRO must be claimed separately.

Check and if necessary adjust the wheel alignment.

Refer to: WHEEL ALIGNMENT