Suspension Air Supply Unit Specifications
| DESCRIPTION | VALUE |
|---|---|
| Working pressure | 16.5 bar gage |
| Mechanical pressure relief range | 22.0 to 27.0 bar gage |
| Operating voltage | 10 to 16.5V (13.5V nominal) |
| Running current consumption | 25-35 Amps RMS depending on load |
| Maximum startup current | 110A |
| Pilot Exhaust Valve - Solenoid valve resistance at 25°C (77°F) | 15.7 ohm ± 10% |
Resistance values will vary with coil temperature. Resistance of test leads must be measured before any readings are taken. Resistance value of the test leads must be subtracted from final solenoid resistance value.