Emergency Park Release (G2320897): Check
WARNING: This page is about a different variant/trim than selected.
WARNING:
Chock the wheels and make sure that all personnel are clear of the vehicle before carrying out the following procedure.
NOTE:
- The ignition must be switched off.
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- The operating lever should only be moved in the direction as shown.
- Remove the engine cover.
Refer to: ENGINE COVER - INGENIUM I6 3.0L PETROL
-
NOTE:
- Use a suitable tool to move the operating lever as illustrated shown.
- A flashing "N" symbol appears on the information and message center to signify the Emergency Park Release (EPR) is activated.
Disengage the park lock.