Instrument Cluster
WARNING: This page is about a different variant/trim than selected.
The virtual display Instrument Cluster (IC) is connected to the Transmission Control Module (TCM) via the High Speed (HS) Controller Area Network (CAN) powertrain systems bus. Transmission status is transmitted by the TCM and displayed to the driver in 1 of 2 displays in the (IC).
For additional information, Refer to: INSTRUMENT CLUSTER - INGENIUM I4 2.0L PETROL/TDV6 3.0L DIESEL/TDV8 4.4L DIESEL/V6 S/C 3.0L PETROL/V8 S/C 5.0L PETROL