LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2019 >> Range Rover Sport HSE Dynamic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - INGENIUM I6 3.0L Petrol -- Range Rover Sport/L494 >> Engine - INGENIUM I6 3.0L Petrol >> Diagnosis And Testing >> Engine - INGENIUM I6 3.0L Petrol (G2718608) >> Service Instruction

Service Instruction

CAUTION: This procedure requires Pathfinder version 238 loaded or a later version.
NOTE:
  • The JLR approved diagnostic equipment will read the VIN  for the vehicle and automatically take the vehicle out of 'Transportation Mode' if required.
  • All ignition ON/OFF instructions must be followed. Failure to complete these instructions may cause damage to the vehicle control modules.
  1. Connect the JLR approved battery support unit.
  2. Connect the JLR approved diagnostic equipment to the vehicle and begin a new diagnostic session.
  3. Follow the JLR approved diagnostic equipment prompts.
  4. Select 'ECU Diagnostics'.
  5. Select 'All DTC  s'.
  6. Select 'Clear all DTC  s'.
  7. Follow all on-screen instructions to complete this task.
  8. When all of the tasks are complete, exit the current session.
  9. Disconnect the JLR approved diagnostic equipment and the Jaguar Land Rover approved battery support unit.