LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2019 >> Range Rover Sport HSE Dynamic >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I6 3.0L Petrol -- Range Rover Sport/L494 >> Engine Cooling - INGENIUM I6 3.0L Petrol >> Diagnosis And Testing >> Engine Cooling - INGENIUM I6 3.0L Petrol (G2297094) >> Variable Coolant Pump Pinpoint Tests >> Pinpoint Test F: Pcm Diagnostic Trouble Code Repair Actions P2B83 Dry Running

Pinpoint Test F: Pcm Diagnostic Trouble Code Repair Actions P2B83 Dry Running

  1. F1: PCM DIAGNOSTIC TROUBLE CODE REPAIR ACTIONS P2B83 DRY RUNNING 1 
    1. Using the Jaguar Land Rover approved diagnostic equipment, check for DTC  P2B83 set in the PCM  Is the coolant pump running?

      Yes:  Intermittent fault - Check the cooling system for restrictions or blockages and bleed the system to remove any trapped air. GO to  F2.

      No:  Disconnect the coolant pump link harness from both ends, Clean all terminals and pins with a suitable contact cleaner spray and reconnect. GO to  F2.

  2. F2: PCM DIAGNOSTIC TROUBLE CODE REPAIR ACTIONS P2B83 DRY RUNNING 2 
    1. Clear the DTC  s and retest

      Is the coolant pump now running correctly?

      Yes:  If the coolant pump is running correctly, Check for other DTC  s and restart the diagnostic if necessary

      No:  If the coolant pump is not running, install a new coolant pump as necessary

scientia non olet · About LEMON Manuals