Pinpoint Test M: Massage Seat Tests
- M1: MASSAGE SEAT TEST 1
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test
- Check the relevant seat module for related DTCs
Are any relevant DTCs set?
Yes: Perform the relevant corrective action
No: GO to M2.
- M2: MASSAGE SEAT TEST 2 NOTE: The massage circuit current specification is 1.10A ± 10%.
- Connect an inductive ammeter to the massage master solenoid power circuit
- Set the seat massage function to on
Is the measured current less than specification?
Yes: Refer to the electrical circuit diagrams and check the seat massage circuits for open circuit, high resistance
No: Check the massage air cell hoses for blockages/leaks