LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar First Edition >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension -- Range Rover Velar/L560 >> Rear Suspension >> Removal And Installation >> Upper Arm (G1899815) >> Installation

Upper Arm (G1899815): Installation

  1. Install the upper arm.
    CAUTION: Install new nuts and bolts.

    Renew Part: Rear suspension upper arm to subframe bolt Quantity: 1  .

    Renew Part: Rear suspension upper arm to subframe nut Quantity: 1  .

    Renew Part: Rear upper arm to wheel knuckle nut Quantity: 1  .

    Renew Part: Rear upper arm to wheel knuckle bolt Quantity: 1  .

    Torque 

    Stage 1: 60 Nm 

    Stage 2: 60° 

  2. Install the rear wheel tire.

    Refer to: WHEEL AND TIRE

  3. Use the Jaguar Land Rover (JLR) approved wheel alignment equipment, check and if necessary adjust the wheel alignment. SRO 576515 Rear Wheel Alignment - check and adjust to be claimed separately.

    Refer to: WHEEL ALIGNMENT

scientia non olet · About LEMON Manuals