Engine Cooling - V6 S/C 3.0L Petrol (G2006211)
NOTE:
Coolant must be collected into a clean container and can be reused if not contaminated.
| DESCRIPTION |
SPECIFICATION |
| Jaguar Premium Cooling System Fluid |
WSS-M97B44-D |
| Jaguar Premium Cooling System Flush |
EGR-M14P7-A |
| Jaguar Premium Cooling System Fluid concentration |
50% |
| ENGINE |
CAPACITY (DRY) |
CAPACITY (FILL) |
| 3.0L supercharger |
13.5 Liters |
8.6 Liters |
TORQUE SPECIFICATIONS
| DESCRIPTION |
NM |
LB-FT |
LB-IN |
| Coolant expansion tank retaining bolt |
7 |
5 |
60 |
| Cooling fan motor and shroud retaining nuts |
4.8 |
3.5 |
42 |
| Electric thermostat housing retaining bolt |
9 |
6.5 |
78 |
| Coolant pump retaining bolts |
12 |
9 |
108 |
| Radiator retaining bolts |
9 |
6.5 |
78 |
| Radiator drain plug |
3.5 |
2.6 |
31 |
| Coolant bleed screw(s) |
3 |
2 |
24 |
| Cooling module bracket retaining bolts |
9 |
6.5 |
78 |
| Auxiliary coolant pump retaining bolt |
9 |
6.5 |
78 |
| Radiator mounting bracket retaining bolt |
4.8 |
3.5 |
42 |
| Active grille air shutter |
1.9 |
1.5 |
18 |