LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar First Edition >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V6 S/C 3.0L Petrol -- Range Rover Velar/L560 >> Engine Cooling - V6 S/C 3.0L Petrol >> Removal And Installation >> Coolant Expansion Tank (G2132055) >> Installation

Coolant Expansion Tank (G2132055): Installation

  1. Install the expansion tank. Connect the lower coolant hose and coolant level sensor wiring harness.

    Torque  : 7 Nm 

  2. Remove the hose clamp.
  3. Install the coolant expansion tank 2 upper coolant hoses
  4. Connect and secure the air intake temperature sensor wiring harness.
  5. Top up the coolant level.
  6. Install the coolant expansion tank cap.
scientia non olet · About LEMON Manuals