LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar First Edition >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Supercharger Cooling - V6 S/C 3.0L Petrol -- Range Rover Velar/L560 >> Supercharger Cooling - V6 S/C 3.0L Petrol >> Removal And Installation >> Coolant Pump (G1829880) >> Installation

Coolant Pump (G1829880): Installation

  1. Install the coolant pump.

    Torque  : 9 Nm 

  2. Connect the 2 coolant hoses.
    • Connect the coolant pump electrical connector.
    • Install the 2 wiring harness clips.
  4. Install the left air cleaner outlet pipe.

    Refer to: LEFT AIR CLEANER OUTLET PIPE

  5. Install the left air cleaner.

    Refer to: LEFT AIR CLEANER

  6. Fill the cooling system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING

  7. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals