Turbocharger Bypass Valve (G2131203): Removal

NOTE:

This procedure contains illustrations showing certain components removed to provide extra clarity.
This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING
Remove the engine undershield.
Refer to: ENGINE UNDERSHIELD
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Disconnect the 2 bypass valve pipes.
- Disconnect the electrical connector.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Disconnect the 2 air outlet pipes.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Release the vacuum line.
- Remove the 4 bolts.
- Remove the turbocharger bypass valve.