LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar First Edition >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- Range Rover Velar/L560 >> Hydraulic Brake Actuation G2006022) >> Removal And Installation >> Brake Pedal And Bracket (G2133019) >> Installation

Brake Pedal And Bracket (G2133019): Installation

  1. CAUTION: Make sure that new nuts are installed.
    • Install the brake pedal.
    • Tighten the 4 nuts to the specified torque.

      Renew Part: Brake pedal mounting nut(s) Quantity: 4  .

      Torque  : 25 Nm 

  2. Position the stoplamp switch harness and secure the retaining clips onto the studs.
  3. Install a new brake booster push rod retaining clip.

    Renew Part: Retaining clip Quantity: 1  .

  4. Install the stoplamp switch.

    Refer to: STOPLAMP SWITCH

scientia non olet · About LEMON Manuals