Front Dynamic Balancer (G1778960): Installation
WARNING: This page is about a different variant/trim than selected.
Torque
Stage 1: 25 Nm
Stage 2: 30°
Torque : 21 Nm
Using a suitable tool, compress the timing chain tensioner.
-
CAUTION: Using a suitable tool, lock the component.
Torque : 21 Nm
-
multimedia:A supplement to the article is available.
Install the lower timing chain making sure the colored chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.
Special Tool(s): JLR-303-1621
Torque : 11 Nm
- Refer to: OIL PAN