LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine - INGENIUM I4 2.0L Diesel -- Range Rover Velar/L560 (2 Of 2)) >> Engine - INGENIUM I4 2.0L Diesel >> Removal And Installation >> Lower Timing Chain Cover Blanking Plug (G2320529) >> Installation

Lower Timing Chain Cover Blanking Plug (G2320529): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install a new lower timing chain cover blanking plug.
    • Install the coolant pipes in the correct location.
    • Install and tighten the 3 bolts.

      Torque  : 10 Nm 

  3. Install the engine undershield.

    Refer to: ENGINE UNDERSHIELD

scientia non olet · About LEMON Manuals