LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Exhaust System - TDV6 3.0L Diesel -- Range Rover Velar/L560) >> Exhaust System - TDV6 3.0L Diesel >> Diagnosis And Testing >> Exhaust System - TDV6 3.0L Diesel (G1899143) >> Def Quality Concern

Def Quality Concern

WARNING: This page is about a different variant/trim than selected.
SITUATION CAUSE ACTION
  • A customer may express a concern that the MIL  is illuminated and/or the 'Incorrect DEF  Quality' message is displayed on the Instrument Cluster (IC)
  • A technician may find Diagnostic Trouble Code(s) P2BA9 and/or P20EE stored in the Powertrain Control Module (PCM)
  • Incorrect DEF  quality
  • Incorrect fluid type (coolant, screenwash, diesel, etc)
  • Induction air leaks
  • Exhaust gas leaks
  • SCR  deposits or contamination
  • NOx sensor issues
  • PCM software
  • Should a customer express this concern, follow the pinpoint test below


SITUATION CAUSE ACTION
  • A customer may express a concern that the MIL  is illuminated and/or the 'Incorrect DEF  Quality' message is displayed on the Instrument Cluster (IC)
  • A technician may find Diagnostic Trouble Code(s) P2BA9 and/or P20EE stored in the Powertrain Control Module (PCM)
  • Incorrect DEF  ) quality
  • Incorrect fluid type (coolant, screenwash, diesel, etc)
  • Induction air leaks
  • Exhaust gas leaks
  • SCR  deposits or contamination
  • NOx sensor issues
  • PCM software
  • Should a customer express this concern, follow the pinpoint test below


SITUATION CAUSE ACTION
  • A customer may express a concern that the MIL  is illuminated and/or the 'Incorrect DEF  Quality' message is displayed on the Instrument Cluster (IC)
  • A technician may find Diagnostic Trouble Code(s) P2BA9 and/or P20EE stored in the Powertrain Control Module (PCM)
  • Incorrect DEF  quality
  • Incorrect fluid type (coolant, screenwash, diesel, etc)
  • Induction air leaks
  • Exhaust gas leaks
  • SCR  deposits or contamination
  • NOx sensor issues
  • PCM software
  • Should a customer express this concern, follow the pinpoint test below