Exhaust Center Section - Vehicles Equipped With Selective Catalyst Reduction System
WARNING: This page is about a different variant/trim than selected.
The exhaust center section comprises the Selective Catalyst Reduction (SCR) catalytic converter.
The inlet and outlet pipes of the SCR catalytic converter are connected to the exhaust front section outlet and the exhaust rear section inlet pipes by clamps.
A mass damper is secured to a bracket on the front of the exhaust center section.
A hanger bracket with a mounting rubber is connected to a common bracket which is bolted to the vehicle body, to support the SCR catalytic converter.
For additional information, Refer to: SELECTIVE CATALYST REDUCTION