LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Engine Emission Control - TDV6 3.0L Diesel -- Range Rover Velar/L560) >> Engine Emission Control - TDV6 3.0L Diesel >> Removal And Installation >> Crankcase Vent Oil Separator (G1879927) >> Installation

Crankcase Vent Oil Separator (G1879927): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Install new seals.

    Install the crankcase vent oil separator.

    Renew Part: Crankcase oil vent oil separator to cylinder block seals Quantity:  .

  2. Connect the breather hose.
  3. Install the wiring harness.
  4. Install the engine cover.

    Refer to: ENGINE COVER - TDV6 3.0L DIESEL