Pinpoint Test D: Steering Column Locked - (Message Displayed)

WARNING: This page is about a different variant/trim than selected.

D1: IGNITION SWITCHES OFF AFTER 3 SECONDS
NOTE:
- Conditions for starting in addition to pressing the start button are
- For automatic transmission vehicles, ensure the brake pedal is depressed and the park or neutral selected
- If the engine can be heard to crank there is no fault with the smart key
- If the locking pin is still engaged, turn the steering wheel to overcome the side load
- Start authorization defined as Ignition functions, Steering column lock engagement, Engine immobilize and smart key authorization
1. Unlock the vehicle using the key fob, within 3 minutes of unlocking ensure the steering wheel can rotate freely. Perform a further lock and unlock check and attempt to start vehicle. If the steering 'column locked' message is still displayed, Lock the vehicle with the key fob and ensure the column is locked (If installed) by turning the steering wheel. Then unlock the vehicle ensuring the column Steering wheel can turn freely. Now perform another start attempt
  Did the engine start?
  
  Yes: No further action required
  
  No: Contact dealer technical support