Pinpoint Test C: Press Start And Brake - (Message Displayed)

WARNING: This page is about a different variant/trim than selected.

C1: ENGINE FAILS TO CRANK
NOTE:
- Conditions for starting in addition to pressing the start button are
- For automatic transmission vehicles, ensure the brake pedal is depressed and the park or neutral selected
- If the engine can be heard to crank there is no fault with the smart key
- If the locking pin is still engaged, turn the steering wheel to overcome the side load
- Start authorization defined as Ignition functions, Steering column lock engagement, Engine immobilize and smart key authorization
1. Check that there is sufficient brake pressure, (Automatic transmission only). Attempt another start making sure that the brake pedal is pressed firmly so the message is no longer displayed. In certain conditions this may require a more effort than usual
  Has the vehicle started?
  
  Yes: No further action required
  
  No: Contact dealer technical support