Fuel Charging And Controls - TDV6 3.0L Diesel (G2006449): Specifications
WARNING: This page is about a different variant/trim than selected.
NOTE:
A = refer to procedure for the correct torque sequence.
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT |
|---|---|---|
| Fuel injection pump mounting bracket bolts | 10 | 7 |
| Fuel injection pump belt rear cover to fuel injection pump bolts | 23 | 17 |
| Engine harness bracket to fuel injection pump bolts | 23 | 17 |
| Fuel injection pump sprocket bolt | 50 | 37 |
| Fuel injection pump belt rear cover nuts and bolts | 10 | 7 |
| Camshaft Rear End Accessory Drive (READ) pulley hub retaining bolt | A | - |
| Camshaft READ pulley retaining bolts | 23 | 17 |
| Fuel injector retaining bolts | 9 | 7 |
| Fuel rail retaining bolts | 24 | 18 |
| High-pressure fuel line bracket retaining bolts | 10 | 7 |
| High-pressure fuel line union nuts | A | - |
| Fuel rail supply line union nuts | A | - |
| Fuel crossover line union nuts | A | - |
| Fuel pump driver module nuts | 11 | 8 |
| Auxiliary fuel pump driver module nuts | 6 | 4 |
| Intake air shut-off throttle nut | 10 | 7 |
| Air pipe clamp | 3 | 2 |
| Air pipe bolts | 5 | 4 |
| Engine harness mounting bracket nut and bolt | 10 | 7 |
| Engine harness retaining clip bolt | 10 | 7 |
| Engine harness casing bolts | 10 | 7 |
| Exhaust heat shield nuts and bolts | 10 | 7 |