LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Fuel Charging And Controls - TDV6 3.0L Diesel -- Range Rover Velar/L560) >> Fuel Charging And Controls - TDV6 3.0L Diesel (G2006449) >> Removal And Installation >> High Pressure Fuel Pump Temperature Sensor (G2230901) >> Installation

High Pressure Fuel Pump Temperature Sensor (G2230901): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Do not apply oil to the thread of the High Pressure (HP) fuel pump temperature sensor.
    G14058575Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the High Pressure (HP) fuel pump temperature sensor.

      Torque  : 27 Nm 

    • Install the HP fuel pump temperature sensor retaining clip.
  2. Install the HP fuel pump.

    Refer to: FUEL INJECTION PUMP 

scientia non olet · About LEMON Manuals