LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Cooling - V6 S/C 3.0L Petrol -- Range Rover Velar/L560) >> Engine Cooling - V6 S/C 3.0L Petrol >> Removal And Installation >> Engine Coolant Level Switch (G2424536) >> Installation

Engine Coolant Level Switch (G2424536): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine coolant level switch.
  2. Connect the electrical connector.
    • Reposition the coolant expansion tank into the correct location.
    • Install and tighten the bolt.

      Torque  : 7 Nm 

    • Reposition the wiring harness into the correct location.
    • Install the 6 clips.
scientia non olet · About LEMON Manuals