Electric Cooling Fan And Shroud (G2058541): Installation
WARNING: This page is about a different variant/trim than selected.
- Install the wiring harness.
- Install the cooling fan assembly.
- Secure the coolant hoses.
- Install the cooling fan motor and shroud securing bracket.
Torque : 4.8 Nm
- Install the radiator mounting brackets.
Torque : 4.8 Nm
- Connect the cooling fan electrical connector.
- Connect the auxiliary coolant pump connector.
- Install the intake air duct.
- Connect the radiator bleed hose.
- Connect the radiator upper hose.
-
CAUTION: Take extra care not to damage the surrounding components.
- Install the radiator grille.
- Install the 8 push pins.
- Raise the vehicle.
- Secure the auxiliary coolant pump.
Torque : 7 Nm
- Connect the auxiliary coolant pump electrical connector.
- Fill the coolant system.