Cylinder Head Coolant Outlet Pipe (G2732374): Installation

WARNING: This page is about a different variant/trim than selected.

CAUTION: Make sure that all traces of excess coolant are cleaned from the cylinder head area.
- Install the lower pipe.
  Renew Part: Cylinder head coolant outlet lower pipe Quantity: 1 .
- Install and tighten the 2 bolts.
  Torque : 11.5 Nm
Make sure a new component is installed.
Renew Part: Cylinder head coolant outlet upper pipe Quantity: 1 .
Install the supercharger.
Refer to: SUPERCHARGER (V6 S/C 3.0L Petrol, Removal and Installation).