LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Cooling - V6 S/C 3.0L Petrol -- Range Rover Velar/L560) >> Engine Cooling - V6 S/C 3.0L Petrol >> Removal And Installation >> 5-Way Manifold (G2271344) >> Installation

5-Way Manifold (G2271344): Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: This step is only required if previously removed.
    • Install the 5-way manifold to the bracket.
    • Install the 2 fasteners.
    • Install the bracket.
    • Install and tighten the bolt.

      Torque  : 7 Nm 

    • Install the fastener.
  3. Install the 5 pipes to the 5-way manifold.
  4. Install the Air Cleaner Outlet Pipe T-Connector.

    Refer to: AIR CLEANER OUTLET PIPE T-CONNECTOR

  5. Refill the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

scientia non olet · About LEMON Manuals