LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- Range Rover Velar/L560) >> Electronic Engine Controls - V6 S/C 3.0L Petrol >> Removal And Installation >> Manifold Absolute Pressure Sensor (G2020180) >> Installation

Manifold Absolute Pressure Sensor (G2020180): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the Manifold Absolute Pressure (MAP) sensor.
    • Install the MAP sensor retaining bolt.
    • Connect the MAP sensor electrical connector.
  2. Connect the air pipe.
  3. Install the engine cover.

    Refer to: ENGINE COVER - V6 S/C 3.0L PETROL

scientia non olet · About LEMON Manuals