LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- Range Rover Velar/L560) >> Electronic Engine Controls - V6 S/C 3.0L Petrol >> Removal And Installation >> Engine Oil Level Sensor (G2130673) >> Installation

Engine Oil Level Sensor (G2130673): Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: Lubricate the O-ring seal with clean engine oil.

    Install the new O-ring seal and the sensor.

    Renew Part: Oil level gauge O-ring seal Quantity: 1  .

    Torque  : 12 Nm 

  2. Connect the electrical connector.
  3. Fill the engine with oil.

    Refer to: ENGINE OIL VACUUM DRAINING AND FILLING

scientia non olet · About LEMON Manuals