LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- Range Rover Velar/L560) >> Electronic Engine Controls - V6 S/C 3.0L Petrol >> Removal And Installation >> Crankshaft Position Sensor (G2131521) >> Installation

Crankshaft Position Sensor (G2131521): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Make sure that the mating faces are clean and free of foreign material.

    Install the crankshaft position sensor.

    Torque  : 10 Nm 

  2. Install the air deflector.

    Refer to the appropriate repair information

scientia non olet · About LEMON Manuals