General Specification
WARNING: This page is about a different variant/trim than selected.
| ITEM | SPECIFICATION |
|---|---|
| Cooling fan | 400 W |
| Cooling system type | Pressurized, thermostatically controlled with remote header tank |
| Expansion tank | Pressurized with integrated level sensor |
| Pressure cap rating | 140 kPa |
| Radiator | Crossflow 27 mm core with integrated drain plug |
| Thermostat | Wax element (heated) |
| Starts to open | 95°C (203°F) |
| Fully open | 108°C (226°F) |
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT |
|---|---|---|
| Coolant expansion tank bolt | 7 | 7 |
| Coolant pump bolts | 12 | 9 |
| Coolant pump pulley bolts | 25 | 18.5 |
| Thermostat housing bolts | 12 | 9 |
| Radiator upper support bracket bolts | 9 | 7 |
| Radiator lower support bracket bolts | 9 | 7 |
| Auxiliary radiator mounting bolts | 9 | 7 |
| Active air grille shutter | 1.9 | 1.4 |
| Charge air coolant pump bracket retaining bolt | 7 | 5 |
| Cooling fan and motor shroud retaining bolts | 7 | 5 |
| Cooling fan coolant pip bracket retaining bolt | 5 | 3.5 |
| Cooling module bracket retaining bolts | 9 | 6.5 |
| Radiator support bracket retaining bolts | 5 | 3.5 |