LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Cooling - INGENIUM I4 2.0L Diesel -- Range Rover Velar/L560) >> Engine Cooling - INGENIUM I4 2.0L Diesel >> Removal And Installation >> Coolant Expansion Tank (G2132055) >> Installation

Coolant Expansion Tank (G2132055): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the expansion tank. Connect the lower coolant hose and coolant level sensor wiring harness.

    Torque  : 7 Nm 

  2. Remove the hose clamp.
  3. Install the coolant expansion tank 2 upper coolant hoses
  4. Connect and secure the air intake temperature sensor wiring harness.
  5. Top up the coolant level.
  6. Install the coolant expansion tank cap.
scientia non olet · About LEMON Manuals