LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Cooling - INGENIUM I4 2.0L Diesel -- Range Rover Velar/L560) >> Engine Cooling - INGENIUM I4 2.0L Diesel >> Removal And Installation >> Charge Air Radiator (G2135291) >> Installation

Charge Air Radiator (G2135291): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the charge air radiator assembly.
  2. Make sure the upper charge air radiator securing clips are positioned correctly.
  3. Make sure the lower charge air radiator securing clips are positioned correctly.
  4. Connect the lower charge air radiator coolant hose.
  5. Connect the upper charge air radiator coolant hose.
  6. Install the condenser.

    Refer to: CONDENSER - INGENIUM I4 2.0L DIESEL

  7. Fill the coolant system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G2226948) 

scientia non olet · About LEMON Manuals