LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Cooling - INGENIUM I4 2.0L Diesel -- Range Rover Velar/L560) >> Engine Cooling - INGENIUM I4 2.0L Diesel >> Diagnosis And Testing >> Engine Cooling - INGENIUM I4 2.0L Diesel (G2415236) >> Component Tests >> Radiator Leak Test - Removed From The Vehicle

Radiator Leak Test - Removed From The Vehicle

WARNING: This page is about a different variant/trim than selected.
CAUTION: Do not leak test an aluminum radiator in the same water that is used to leak test copper/brass radiators. Flux and caustic cleaners may be present in the test water which will corrode aluminum. If a separate tank is not available, drain and rinse the test tank before testing an aluminum radiator.

Clean the radiator before leak testing to prevent contamination of the test tank. Leak test the radiator in clean water with 138 kPa (20 psi) air pressure