LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Fuel Charging And Controls - INGENIUM I4 2.0L Diesel -- Range Rover Velar/L560) >> Fuel Charging And Controls - INGENIUM I4 2.0L Diesel >> Description And Operation >> Fuel Charging And Controls - INGENIUM I4 2.0L Diesel (G2006262) >> Description >> Fuel Injector Service Information

Fuel Injector Service Information

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Do not attempt to remove carbon deposits from the diesel injector nozzle.
  • The injector is supplied as a complete assembly. The original injector must not be separated.
NOTE: The Ingenium I4 2.0L diesel engine cylinders are numbered from the front of the engine. Therefore, No. 1 cylinder and No. 1 injector are located at the front of the engine.

If an injector is removed, the injector must be installed to the original cylinder, and does not require re-programming into the Powertrain Control Module (PCM).

If an injector is renewed, the new injector seven digit code and corresponding cylinder number must be programmed into the PCM, using an approved diagnostic system.

scientia non olet · About LEMON Manuals