Engine Emission Control - INGENIUM I4 2.0L Diesel (G2006471)
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT |
|---|---|---|
| Crankcase cover vent oil separator | 12 | 9 |
| Valve cover vent oil separator to EGR bolts | 12 | 9 |
| Low pressure EGR temperature sensor | 3.6 | - |
| Low pressure EGR valve bolts | 25 | 18 |
| Low pressure EGR pressure sensor | 12 | 9 |
| Low pressure EGR cooler bypass pipe bolts | 25 | 18 |
| Low pressure EGR cooler outlet pipe nut and bolt | 12 | 9 |
| High pressure EGR Valve bolts 1 | 12 | 9 |
| High pressure EGR Valve bolts 2 | 7 | 5 |
| High pressure EGR cooler inlet pipe bolts | 12 | 9 |
| High pressure EGR cooler pipe to inlet manifold bolts | 7 | 5 |
| High pressure EGR cooler pipe to EGR | 12 | 9 |
| High pressure EGR temperature sensor | 4 | 3 |
| High pressure EGR cooler clamp | 4 | 3 |
| DEF tank upper retaining bolt | 10 | 7 |
| DEF tank lower bracket retaining bolts | 10 | 7 |
| DEF injection pump retaining bolts | 6 | 4 |