LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Emission Control - INGENIUM I4 2.0L Diesel -- Range Rover Velar/L560) >> Engine Emission Control - INGENIUM I4 2.0L Diesel >> Removal And Installation >> High Pressure Exhaust Gas RECIRCULATION Temperature Sensor (G1947551) >> Installation

High Pressure Exhaust Gas RECIRCULATION Temperature Sensor (G1947551): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Make sure that the mating faces are clean and free of foreign material.
    • Install the high pressure Exhaust Gas Recirculation (EGR) temperature sensor.

      Torque  : 4 Nm 

    • Connect the electrical connector for the high pressure EGR temperature sensor.
  2. Install the engine cover.
scientia non olet · About LEMON Manuals