LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine - INGENIUM I4 2.0L Diesel -- Range Rover Velar/L560 (1 Of 2)) >> Engine - INGENIUM I4 2.0L Diesel >> Removal And Installation >> Hydraulic Valve Tappet (G1867875) >> Installation

Hydraulic Valve Tappet (G1867875): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION:
    • Lubricate hydraulic valve tappets, roller finger cam followers and hydraulic valve tappet bores with engine oil.
    • Install hydraulic valve tappets and roller finger cam followers to the original fitted order.
    • Make sure the retention clip on the roller finger cam follower has engaged and installed correctly to the hydraulic valve tappet.
    • Make sure roller finger cam follower is located correctly on the valve tip between the two guidance arms.
    G11714883Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  2. Refer to: VALVE COVER
scientia non olet · About LEMON Manuals