Turbocharger Oil Supply Tube - INGENIUM I4 2.0L Diesel - Mid, Low Power (G1868096): Installation

WARNING: This page is about a different variant/trim than selected.

- Install the turbocharger oil supply pipe.
  Torque : 18 Nm
- Install new sealing washers.
  Renew Part: Turbocharger oil feed pipe banjo bolt washers Quantity: 4 .
- Install the breather.
- Install new O-ring seals.
  Renew Part: Breather hose O-ring seal Quantity: 2 .
  
  Torque : 12 Nm
Install the intake air resonator.
Refer to: INTAKE AIR RESONATOR
Check and top-up the engine oil.
Refer to: SPECIFICATIONS