Low Pressure Oil Supply Pipe - INGENIUM I4 2.0L Diesel - High Power (G1933087): Installation

WARNING: This page is about a different variant/trim than selected.

- Install new banjo bolt washers.
  Renew Part: Turbocharger oil feed pipe banjo bolt washers Quantity: 4 .
- Install the turbocharger oil feed pipe.
  Torque : 18 Nm
- Install new O-ring seals.
  Renew Part: Breather hose O-ring seal Quantity: 2 .
- Install the breather hose.
  Torque : 12 Nm
Install the intake air resonator.
Refer to: INTAKE AIR RESONATOR
Check and top up the engine oil level.
Refer to: SPECIFICATIONS