High Pressure Turbocharger - INGENIUM I4 2.0L Diesel - High Power (G1914798): Part(S)
WARNING: This page is about a different variant/trim than selected.
| STEP | PART NAME | QUANTITY |
|---|---|---|
| Installation Step 1 | Exhaust manifold gasket | 1 |
| Installation Step 4 | Exhaust manifold bolts and spacers | 8 |
| Installation Step 7 | Exhaust gas recirculation pipe gasket | 1 |
| Installation Step 9 | Upper oil return pipe O-ring seal | 1 |
| Installation Step 9 | Lower oil return pipe O-ring seal(s) | 1 |
| Installation Step 11 | Turbocharger outlet pipe O-ring kit | 1 |
| Installation Step 12 | Turbocharger oil supply pipe banjo bolt | 1 |
| Installation Step 12 | Turbocharger oil feed pipe banjo bolt washers | 2 |