High Pressure Oil Supply Pipe - INGENIUM I4 2.0L Diesel - High Power (G1933085): Installation

WARNING: This page is about a different variant/trim than selected.

- Install the turbocharger oil supply tube.
- Install new sealing washers.
  Renew Part: Turbocharger oil feed pipe banjo bolt washers Quantity: 2 .
- Install new banjo bolts.
  Renew Part: Turbocharger oil supply pipe banjo bolt Quantity: 2 .
  
  Torque : 18 Nm
Install the low pressure turbocharger.
Refer to: LOW PRESSURE EXHAUST GAS RECIRCULATION COOLER
Check and top-up the engine oil.
Refer to: SPECIFICATIONS