Exhaust System - INGENIUM I4 2.0L Diesel (G2006677)
WARNING: This page is about a different variant/trim than selected.
ALL VEHICLES - TORQUE SPECIFICATION
| DESCRIPTION | NM | LB-FT | lb-in |
|---|---|---|---|
| Catalytic converter to exhaust manifold retaining clamp | 10 | 7.5 | 90 |
| Catalytic converter to exhaust manifold bracket retaining bolts | 25 | 18.5 | 222 |
| Catalytic converter to transmission mounting bracket retaining bolts | 11 | 8 | 96 |
| Catalytic converter to low pressure exhaust gas recirculation (EGR) retaining bolts | 12 | 9 | 108 |
| Catalytic converter retaining clamp | 11 | 8 | 96 |
| Catalytic converter mounting bracket retaining bolts | 25 | 18.5 | 222 |
| Front silencer to catalytic converter retaining nuts | 48 | 35.5 | 426 |
| Heated oxygen sensor (HO2S) | 48 | 35.5 | 426 |
| Exhaust gas temperature sensor | 35 | 26 | 312 |
| Rear silencer retaining clamp | 55 | 40.5 | 486 |
| Mass damper retaining bolt | 22 | 16 | 192 |
| Exhaust system to catalytic converter (Ingenium diesel) | 40 | 29.5 | 354 |
| Differential pressure sensor retaining bolt | 6 | 4.5 | 54 |
WITH DIESEL EXHAUST FLUID SYSTEM - TORQUE SPECIFICATION
| DESCRIPTION | NM | LB-FT | lb-in |
|---|---|---|---|
| Diesel exhaust fluid injection pump retaining clamp | 4.7 | 3.5 | 42 |