Rear Silencer (G2020243): Installation

WARNING: This page is about a different variant/trim than selected.

NOTE: This step is only required if previously removed.

Install the 2 rear dampers.

Torque : 22 Nm
CAUTION: Make sure the exhaust system is supported at all times.
- With the aid of another technician install the rear silencer into the correct position.
- Install the 3 rear silencer exhaust bracket hangers. With the aid of another technician make sure that the exhaust system is always supported.
- Install and tighten the exhaust clamp nut securing the rear silencer and the exhaust system together.
  Torque : 55 Nm
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

When installing the rear silencer make sure the gap between the rear silencer and the rear bumper cover are the same as the noted position prior to removal.