LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Exhaust System - INGENIUM I4 2.0L Diesel -- Range Rover Velar/L560) >> Exhaust System - INGENIUM I4 2.0L Diesel >> Removal And Installation >> Catalytic Converter To Turbocharger Clamp (G2020244) >> Installation

Catalytic Converter To Turbocharger Clamp (G2020244): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION:
    • Make sure that the mating faces are clean and free of corrosion and foreign material.
    • The catalytic converter to turbocharger gasket must be installed to the orientation shown in the illustration.
    G14287670Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install a new catalytic converter to turbocharger gasket.

    Renew Part: Catalytic converter to turbocharger gasket  Quantity: 1  .

  2. To install reverse the removal procedure.

    Renew Part: Catalytic converter to turbocharger clamp  Quantity: 1  .

scientia non olet · About LEMON Manuals