Sliding Roof Panel Blind Guides (G2431282): Installation

WARNING: This page is about a different car, the 2019 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.

- Install the guide into the sliding roof panel blind assembly.
- Repeat this step for the left side.
CAUTION: Make sure the adjustment cable is installed in the previously noted orientation.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the adjustment cable into the sliding roof panel blind guide as illustrated.
- Repeat this step for the left side.
- Install the guide onto the sliding roof panel blind mechanism.
- Slide the guide towards the rear of the vehicle to install the guide onto the mechanism.
- Make sure the locking clip is fully installed.
- Repeat this step for both sides.
Operate the sliding roof panel blind assembly for 3 full cycles to make sure the material has no distortions and the blind assembly is installed correctly.