Secondary Bulkhead Right Inner Panel - V8 S/C 5.0L Petrol (G2263570): Installation

WARNING: This page is about a different car, the 2019 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.

- Install the secondary bulkhead right inner panel.
- Install and tighten the 2 bolts.
  Torque : 6 Nm
- Install the seal.
- Install the clip.
- Install the engine compartment brace.
- Install the grommet
- Install and tighten the 4 bolts.
  Torque : 55 Nm
Install the cowl panel.
Refer to: COWL PANEL
Install the engine cover.
Refer to: ENGINE COVER - V8 S/C 5.0L PETROL