Front Wheel Arch Liner (G2729322): Installation

WARNING: This page is about a different car, the 2019 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.

Reposition the front wheel arch liner in the correct location.
Install the 3 fasteners to the center section of the wheel arch liner.
- Install and tighten the 2 bolts to the rear section of the wheel arch liner.
  Torque : 7 Nm
- Install the 2 push on steel clips.
  Renew Part: Clip - push on steel Quantity: 2 .
- Install and tighten the 3 bolts to the front section of the wheel arch liner.
  Torque : 7 Nm
- Install and tighten the 2 screws to the front section of the wheel arch liner.
  Torque : 7 Nm
Install the wheel and tire.
Refer to: WHEEL AND TIRE